Brass gas valve

Our products line including:
Brass Angle Valves , Brass Ball Valves , Brass Bibcocks,
Brass Manifold ,Brass Pipe Fittings, Check valves, Stop Valves ,
Gas Valves,Gate Valves, Radiator Valves.

we can produce brass gas valves from DN10 to DN25,or size1/2"-1",brass body,brass ball,with steel or aluminium handle

A. Specification of material: 1)Valve body: forged brass;2)Valve ball:brass or steel chrome plated,(as customer requirment);3)Bonnet:brass;4)Ball seat:PTFE;5)Stem:brass or steel,(as customer requirment);6)Handle:steel or aluminium,(as customer requirment);7)Nut:steel;8) Packing: export package;9)Port of loading:NINGBO;B.Pressure:16bar;C.Temperature:0-100 degree celsius;D.Operating conditions:water,oil and gas

Product Description:

Brass gas valve

model: NXQ-040
Size: 1/4",3/8",1/2"
standard: full port
material: brass body , brass ball, aluminum butterfly handle
Temperature: -30threaded: iso228/1

Technical Requirement
Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges.
Before connecting, body cap male thread should be coated with sealing glue.
Handle turn or close freely.
After assembling, test by water at pressure no less than 0.8MPA, no leakage.

BACK